Parabolic Louvers Improve the Quality of Lighting by:

• Eliminating glare
• Rendering more precise light distribution
• Providing better contrast and image definition
• Enhancing color rendition of merchandised products
• Shielding lamps from direct view
• Reducing luminaire surface brightness for maximum visual comfort

Specular Finish

• Precise distribution of light
• For areas where brightness
  control is critical.
• Wide range of product to meet your requirements

Permalux Finish

• Years of easy maintenance
• Contaminants simply wipe away
• Accidents are corrected with minimal effort
• Add $5.00 per 2' x 4'
• Add $ 2.50 per 2' x 2'

Aluma-Lux Finish (Semi -Specular) (run once a month)

• Short lead time
• No cave effect or sharp shadows
• Does not show fingerprints or dust
• Will not bend or dent
• No extra charge

Specular Gold Finish (run once a month)

• Decorative finish for those special areas
• Great for Hospitality industry
• Add $7.50 per 2' x 4'
• Add $ 4.00 per 2' x 2'

How Parabolic Louvers Work

The cellular nature of parabolic louvers physically blocks the passage of light at angles above the shielding angle. The specular aspect of the finish on the curved vertical surfaces reflects down at angles equal to or less than the shielding angle. When these louvers are viewed at angles beyond that shielding angle, they will have little of the brightness associated with the light source. The amount of brightness does depend directly upon the percent of specular reflectance from the finish.

The advantage of Parabolic Louvers is the high degree of controlled light distribution that they offer. This precise light control makes Parabolic Louver ideal for areas with moderate to high concentrations of computer terminals or other visually demanding environments This control is dependent upon the shielding angle offered by the specific louver and the degree of specularity of the finish. Parabolic Louver are the optimum choice for areas where visual comfort and controlled reflection off of vertical 

The small cell sizes provide luminances that conform to important major standards. Parasquare 1 is available in molded
configurations that are readily adapted to the widest range of applications and dimensional modules.

P1-STYLE 1 Ceiling Size Styrene 2' x 4' 2' x 4'  (23-11/16" x 47-11/16") 5/8" x 5/8" x .400"     10 per Carton - 37 lbs.
Item	Color	Price per Piece
P1-24-1	Specular Silver	32.00
P1-24-1-AL	Aluma-Lux	32.00
P1-24-1-BT	Gloss Black	32.00
Permalux Finish Add $5.00 per 2' x 4' Add $ 2.50 per 2' x 2' Specular Gold Finish Add $7.50 per 2' x 4' Add $ 4.00 per 2' x 2'
2' x 2'  (23-11/16" x 23-11/16) 5/8" x 5/8" x .400"    20 per Carton - 37 lbs
Item	Color	Price per Piece
P1-22-1	Specular Silver	17.50
P1-22-1-AL	Aluma-Lux	17.50
P1-22-1-BT	Gloss Black	17.50
Permalux Finish Add $5.00 per 2' x 4' Add $ 2.50 per 2' x 2' Specular Gold Finish Add $7.50 per 2' x 4' Add $ 4.00 per 2' x 2'
P1-Style 4 Fixture Size with flange Styrene 10 per Carton - 39 lbs.  Cell Size: .625" x .625" x .400 O.D. 22-3/4 " x 46-3/4 " I. D. 20-15/16 " x 44-15/16"
Item	Color	Price per Piece
P1-24-4	Specular Silver	32.00
P1-Style 4 Fixture Size with flange Styrene 20 per Carton - 39 lbs. Cell Size: .625" x .625" x .400 O.D. 22-3/4” X 22-3/4”   I. D. 20-15/16” X 20-15/16”
Item	Color	Price per Piece
P1-22-4	Specular Silver	23.50
P1-Style 4X Fixture Size with flange Styrene 10 per Carton Cell Size: .625" x .625" x .400 O.D. 22-1/2 " x 46-1/2" I. D. 20-15/16 " x 44-15/16"
Item	Color	Price per Piece
P1-24-4X	Specular Silver	32.00
P1-Style 4X Fixture Size with flange Styrene 20 per Carton Cell Size: .625" x .625" x .400 O.D. 22-1/2 " x 22-1/2" I. D. 20-15/16" x 20-15/16"
Item	Color	Price per Piece
P1-22-4X	Specular Silver	23.50

Panel Size UnFlanged: Style 1 23-11/16 " x 47-3/4 " (603 x 1213mm) Style 2 23-3/4 " x 47-3/4 " (603 x 1213mm) Flanged: Style 4 O.D. 22-3/4 " x 22-3/4 " | I. D. 20-9/16 " x 20-9/16 " O.D. 22-3/4 " x 46-3/4 " | I. D. 20-9/16 " x 44-5/8 " Style 4X O.D. 22-1/2 " x 46-1/2 " | I. D. 20-9/16 " x 44-5/8 " O.D. 22-1/2 " x 46-1/2 " | I. D. 20-5/16 " x 44-3/8 " (ESP) Materials Polystyrene Acrylic

1-1/2" X 1-1/2" X 1" 38 x 38 x 25,4mm

P2 is the industry standard 1-1/2" x 1-1/2" x 1" (38 x 38 x 25,4mm) injection molded plastic parabolic louver.
This internationally accepted product satisfies the demands of both efficiency and luminance control.
Molded in a number of configurations P2 is adaptable to a wide range applications.
P2 is an important option when a medium scale plastic parabolic louver is required.

The Paracube II louver  is our most versatile louver offering both glare control and higher  light output while
maintaining a visually pleasing and comfortable  environment.
The larger cell design provides higher efficiency  and makes the Paracube II excellent for retail environments,
high  ceiling and other lighting applications where more light is desirable.
The Paracube II is also ideal for office settings with greater  spacing between fixtures.

• 1-1/2" x 1-1/2" x 1" cell size
  
• Provides more light along with controlled brightness
  
• Good glare control
  
• Luminaire Efficiency, 65.4%
  
• Coefficient of Utilization .73
  
• Visual Comfort Probability 94
  
• Molded in Acrylic or Polystyrene material
  
• Ultralux advanced hard protective easy-to-clean metalized surface is standard  on all Paracube II and Paracube III louvers.
  
• Silver metalized finish is standard on all products. Gold, White  and Black finishes are also available

Parabolic louvers represent the most sophisticated and optically precise lighting control media available. Our parabolic louvers incorporate advanced design concepts and the latest in manufacturing technology to produce controlled lighting of unparalleled visual comfort and efficiency. They also represent a visually attractive appearance that is in tune with contemporary design and architectural concepts. The parabolic louver, available in a specular finish, is truly an advanced lighting and decorative instrument meeting today's aesthetic concerns and energy requirements. The parabolic contour is the shape of lighting control for today and the future.

Street Lamp Globes

IF THERE IS EVEN A CREASE OR
A DING IN THE BOX  PLEASE MARK AS DAMAGED OTHERWISE
NO CLAIM CAN BE MADE.
IF THERE IS NO DAMAGE THAT IS OK,
BUT FREIGHT COMPANIES AND
UPS ARE REQUIRING MORE VERIFICATION
TO PROCESS DAMAGE CLAIMS.
BREAKAGE OR DAMAGE TO
CARTONS MUST BE NOTED WHEN
CUSTOMER SIGNS FOR DELIVERY.
ANY CLAIMS FOR MISSING PARTS  MUST BE
MADE WITHIN 7 DAYS OF DELIVERY.
 

edee@edee.com